MegaRAID¶

Посмотреть информацию о контроллере¶

Посмотреть информацию о дисках, подключенных к контроллеру¶

Смотрим журнал контроллера (Читать снизу вверх.)¶

megacli -AdpEventLog -GetLatest 100 -f events.log -aALL -nolog
megacli -AdpEventLog -GetLatest 10 -f /dev/stdout -aALL -nolog

Изъятие диска из массива¶

Работы по восстановлению массива¶

Скидываем конфигурацию с диска:¶

megacli -CfgForeign -Clear -a0

Foreign configuration 0 is cleared on controller 0.

Exit Code: 0x00

Смотрим, что изменилось:¶

megacli pdinfo -PhysDrv \[32:16\] -a0 nolog

 1
 2 Enclosure Device ID: 32
 3 Slot Number: 16
 4 Enclosure position: 1
 5 Device Id: 16
 6 WWN: 5000C50071CAF938
 7 Sequence Number: 1
 8 Media Error Count: 0
 9 Other Error Count: 0
10 Predictive Failure Count: 0
11 Last Predictive Failure Event Seq Number: 0
12 PD Type: SAS
13
14 Raw Size: 279.396 GB [0x22ecb25c Sectors]
15 Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
16 Coerced Size: 278.875 GB [0x22dc0000 Sectors]
17 Sector Size:  0
18 Firmware state: Unconfigured(good), Spun Up
19 Device Firmware Level: YS0A
20 Shield Counter: 0
21 Successful diagnostics completion on :  N/A
22 SAS Address(0): 0x5000c50071caf939
23 SAS Address(1): 0x0
24 Connected Port Number: 0(path0) 
25 Inquiry Data: SEAGATE ST9300653SS     YS0A6XN62C41            
26 FDE Capable: Not Capable
27 FDE Enable: Disable
28 Secured: Unsecured
29 Locked: Unlocked
30 Needs EKM Attention: No
31-Foreign State: Foreign 
32-Foreign Secure: Drive is not secured by a foreign lock key
33+Foreign State: None 
34 Device Speed: 6.0Gb/s 
35 Link Speed: 6.0Gb/s 
36 Media Type: Hard Disk Device
37 Drive Temperature :30C (86.00 F)
38 PI Eligibility:  No 
39 Drive is formatted for PI information:  No
40 PI: No PI
41 Port-0 :
42 Port status: Active
43 Port's Linkspeed: 6.0Gb/s 
44 Port-1 :
45 Port status: Active
46 Port's Linkspeed: Unknown 
47 Drive has flagged a S.M.A.R.T alert : No
48
49 Exit Code: 0x00