RACADM over SSH¶

Включение SNMPv3¶

iDRAC7¶

последовательность команд важна

racadm set iDRAC.users.16.UserName zzzzzz
racadm set iDRAC.users.16.Password xxxxxxxxxx
racadm set iDRAC.users.16.SNMPv3AuthenticationType SHA
racadm set iDRAC.users.16.SNMPv3PrivacyType AES
racadm set iDRAC.users.16.SNMPv3Enable Enabled
racadm set iDRAC.users.16.Enable 1

racadm set iDRAC.SNMP.SNMPProtocol SNMPv3
racadm set iDRAC.SNMP.AgentEnable 1

управление питанием сервера¶

iDRAC6¶

hardreset — Performs a force reset (reboot) operation on the managed system.
powercycle — Performs a power-cycle operation on the managed system.
powerdown — Powers down the managed system.
powerup — Powers up the managed system.
powerstatus — Displays the current power status of the server (ON or OFF).
graceshutdown — Performs a graceful shutdown of the server.

пример:

racadm serveraction powerstatus

логирование syslog¶

iDRAC6¶

racadm config -g cfgRemoteHosts -o cfgRhostsSyslogEnable 1
racadm config -g cfgRemoteHosts -o cfgRhostsSyslogServer1 93.171.206.67
racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPort 514

iDRAC7¶

racadm set idrac.syslog.Server1 93.171.206.67
racadm set idrac.syslog.Port 514
racadm set idrac.syslog.SysLogEnable 1

отключение всего, торчащего в интернет¶

iDRAC6¶

racadm config -g cfgRemoteHosts -o cfgRhostsFwUpdateTftpEnable 0
racadm config -g cfgRacTuning -o cfgRacTuneRemoteRacadmEnable 0
racadm config -g cfgRacTuning -o cfgRacTuneHttpPort 80
racadm config -g cfgRacTuning -o cfgRacTuneSshPort=22022
racadm config -g cfgRacTuning -o cfgRacTuneWebserverEnable 0
racadm config -g cfgRacTuning -o cfgRacTuneLocalServerVideo 0
racadm config -g cfgRacTuning -o cfgRacTuneConRedirEnable 0
racadm config -g cfgRacVirtual -o cfgLCDriveEnable 0
racadm config -g cfgIpmiSol -o cfgIpmiSolEnable 0
racadm config -g cfgIpmiLan -o cfgIpmiLanEnable 0

iDRAC7¶

racadm set idrac.IPMILan.enable 0
racadm set idrac.IPMISOL.enable 0
racadm set idrac.redfish.enable 0
racadm set idrac.telnet.enable 0
racadm set idrac.virtualconsole.enable 0
racadm set idrac.virtualmedia.enable 0
racadm set idrac.vncserver.enable 0
racadm set idrac.webserver.enable 0