LSI-Logic MPT-Fusion » История » Версия 7
  Андрей Волков, 2015-03-13 13:15 
  
| 1 | 1 | Андрей Волков | h1. LSI-Logic MPT-Fusion | 
|---|---|---|---|
| 2 | |||
| 3 | 4 | Андрей Волков | h1. LSI-Logic-SAS1064E-B3-SAS3042E | 
| 4 | |||
| 5 | h2. Сбор данных | ||
| 6 | |||
| 7 | h3. Прошивка для SAS контроллера от производителя | ||
| 8 | |||
| 9 | HP ProLiant DL160 G5 Server | ||
| 10 | http://h20565.www2.hp.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=3580694 | ||
| 11 | |||
| 12 | Контроллер LSI SAS 1064E(B3) | ||
| 13 | http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=MTX_80c445b9f94b4564a18dc2d165 | ||
| 14 | Firmware and BIOS for HP SAS/SATA HBA with RAID | ||
| 15 | Firmware - Storage Controller | ||
| 16 | Version: 06.18.07.00 (1.23.46.00)(11 Dec 2012) | ||
| 17 | SP45154.exe (2.1 MB) | ||
| 18 | http://ftp.hp.com/pub/softlib2/software1/pubsw-windows/p1285397499/v83083/SP45154.exe | ||
| 19 | |||
| 20 | h3. Прошивальщик под linux | ||
| 21 | |||
| 22 | Статья | ||
| 23 | http://bugsplatter.id.au/sasflash/#using-sasflash | ||
| 24 | |||
| 25 | Прошивальщик | ||
| 26 | http://www.lsi.com/downloads/Public/Host%20Bus%20Adapters/Host%20Bus%20Adapters%20Common%20Files/SAS_SATA_3G_P21/Installer_P21_for_Linux.zip | ||
| 27 | 1 | Андрей Волков | |
| 28 | 2 | Андрей Волков | h3. Смотрим | 
| 29 | |||
| 30 | 1 | Андрей Волков | *./sasflash -listall* | 
| 31 | |||
| 32 | <pre> | ||
| 33 | **************************************************************************** | ||
| 34 | LSI Corporation SAS FLASH Utility. | ||
| 35 | |||
| 36 | SASFlash Version 1.30.00.00 (2011.08.24) | ||
| 37 | |||
| 38 | Copyright (c) 2006-2011 LSI Corporation. All rights reserved. | ||
| 39 | **************************************************************************** | ||
| 40 | |||
| 41 | Adapter Selected is a LSI SAS 1064E(B3): | ||
| 42 | |||
| 43 | Num Ctlr FW Ver NVDATA x86-BIOS EFI-BSD PCI Addr | ||
| 44 | ----------------------------------------------------------------------- | ||
| 45 | |||
| 46 | 1 1064E(B3) 01.23.39.00 2b.86 06.18.05.00 No Image 00:09:00:00 | ||
| 47 | |||
| 48 | |||
| 49 | Finished Processing Commands Successfully. | ||
| 50 | Exiting SASFlash. | ||
| 51 | |||
| 52 | </pre> | ||
| 53 | |||
| 54 | *lsiutil -p 1 -i -s* | ||
| 55 | |||
| 56 | <pre> | ||
| 57 | LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 | ||
| 58 | |||
| 59 | 1 MPT Port found | ||
| 60 | |||
| 61 | ============================================================================== | ||
| 62 | |||
| 63 | /proc/mpt/ioc0 LSI Logic SAS1064E B3 MPT 105 Firmware 01172700 IOC 0 | ||
| 64 | |||
| 65 | Seg/Bus/Dev/Fun Board Name Board Assembly Board Tracer | ||
| 66 | 0 9 0 0 SAS3042E L3-25006-02C P62200BGKW540H | ||
| 67 | |||
| 68 | Current Port State | ||
| 69 | ------------------ | ||
| 70 | SAS1064E's links are 1.5 G, 1.5 G, down, down | ||
| 71 | |||
| 72 | Software Version Information | ||
| 73 | ---------------------------- | ||
| 74 | Current active firmware version is 01172700 (1.23.39) | ||
| 75 | Firmware image's version is MPTFW-01.23.39.00-IE | ||
| 76 | LSI Logic | ||
| 77 | x86 BIOS image's version is MPTBIOS-6.18.05.00 (2008.05.14) | ||
| 78 | |||
| 79 | Firmware Settings | ||
| 80 | ----------------- | ||
| 81 | SAS WWID: 500605b000144f2c | ||
| 82 | Multi-pathing: Disabled | ||
| 83 | SATA Native Command Queuing: Disabled | ||
| 84 | SATA Write Caching: Disabled | ||
| 85 | SATA Maximum Queue Depth: 1 | ||
| 86 | Device Missing Report Delay: 3 seconds | ||
| 87 | Device Missing I/O Delay: 3 seconds | ||
| 88 | Phy Parameters for Phynum: 0 1 2 3 | ||
| 89 | Link Enabled: Yes Yes Yes Yes | ||
| 90 | Link Min Rate: 1.5 1.5 1.5 1.5 | ||
| 91 | Link Max Rate: 3.0 3.0 3.0 3.0 | ||
| 92 | SSP Initiator Enabled: Yes Yes Yes Yes | ||
| 93 | SSP Target Enabled: No No No No | ||
| 94 | Port Configuration: Auto Auto Auto Auto | ||
| 95 | Target IDs per enclosure: 1 | ||
| 96 | Persistent mapping: Enabled | ||
| 97 | Physical mapping type: Enclosure/Slot | ||
| 98 | Target ID 0 reserved for boot: Yes | ||
| 99 | Starting slot (direct attach): 1 | ||
| 100 | Target IDs (physical mapping): 8 | ||
| 101 | Interrupt Coalescing: Enabled, timeout is 16 us, depth is 4 | ||
| 102 | |||
| 103 | Persistent Mappings | ||
| 104 | ------------------- | ||
| 105 | No persistent entries found | ||
| 106 | |||
| 107 | B___T___L Type Vendor Product Rev SASAddress PhyNum | ||
| 108 | 0 1 0 Disk ATA OCZ-AGILITY3 2.25 1221000000000000 0 | ||
| 109 | 0 2 0 Disk ATA OCZ-AGILITY3 2.25 1221000001000000 1 | ||
| 110 | 2 | Андрей Волков | </pre> | 
| 111 | |||
| 112 | h3. Перепрошиваем Firmware | ||
| 113 | |||
| 114 | *./sasflash -fwall 6ei_r_ld.fw* | ||
| 115 | |||
| 116 | <pre> | ||
| 117 | **************************************************************************** | ||
| 118 | LSI Corporation SAS FLASH Utility. | ||
| 119 | |||
| 120 | SASFlash Version 1.30.00.00 (2011.08.24) | ||
| 121 | |||
| 122 | Copyright (c) 2006-2011 LSI Corporation. All rights reserved. | ||
| 123 | **************************************************************************** | ||
| 124 | |||
| 125 | Ignoring All other commands except for output flags | ||
| 126 | |||
| 127 | Attempting to flash firmware to LSI SAS 1064E(B3): | ||
| 128 | |||
| 129 | Executing Operation: Flash Firmware Image | ||
| 130 | |||
| 131 | Checksum Passed: 00000000 | ||
| 132 | |||
| 133 | Verifying NVDATA Compatibility. . . | ||
| 134 | NVDATA Versions Compatible | ||
| 135 | |||
| 136 | Product ID and Vendor ID match verified. | ||
| 137 | |||
| 138 | Valid BootLoader Image verified. | ||
| 139 | |||
| 140 | Beginning Firmware Download | ||
| 141 | Firmware Download: SUCCESSFUL! | ||
| 142 | |||
| 143 | Verifying the image flashed correctly. . . | ||
| 144 | |||
| 145 | Firmware Flash: SUCCESSFUL! | ||
| 146 | |||
| 147 | Resetting Adapter: | ||
| 148 | Adapter Successfully reset. | ||
| 149 | |||
| 150 | Updating VPD data! | ||
| 151 | VPD update not needed | ||
| 152 | |||
| 153 | |||
| 154 | Finished Processing Commands Successfully. | ||
| 155 | Exiting SASFlash. | ||
| 156 | </pre> | ||
| 157 | |||
| 158 | h3. Смотрим | ||
| 159 | |||
| 160 | 3 | Андрей Волков | *./sasflash -listall* | 
| 161 | 1 | Андрей Волков | |
| 162 | 3 | Андрей Волков | <pre> | 
| 163 | <code class="diff"> | ||
| 164 | **************************************************************************** | ||
| 165 | LSI Corporation SAS FLASH Utility. | ||
| 166 | |||
| 167 | SASFlash Version 1.30.00.00 (2011.08.24) | ||
| 168 | |||
| 169 | Copyright (c) 2006-2011 LSI Corporation. All rights reserved. | ||
| 170 | **************************************************************************** | ||
| 171 | |||
| 172 | Adapter Selected is a LSI SAS 1064E(B3): | ||
| 173 | |||
| 174 | Num Ctlr FW Ver NVDATA x86-BIOS EFI-BSD PCI Addr | ||
| 175 | ----------------------------------------------------------------------- | ||
| 176 | |||
| 177 | -1 1064E(B3) 01.23.39.00 2b.86 06.18.05.00 No Image 00:09:00:00 | ||
| 178 | +1 1064E(B3) 01.23.46.00 2b.90 06.18.05.00 No Image 00:09:00:00 | ||
| 179 | |||
| 180 | |||
| 181 | Finished Processing Commands Successfully. | ||
| 182 | Exiting SASFlash. | ||
| 183 | </code> | ||
| 184 | 2 | Андрей Волков | </pre> | 
| 185 | |||
| 186 | h3. Перепрошиваем BIOS | ||
| 187 | |||
| 188 | 5 | Андрей Волков | *./sasflash -biosall mptsas.rom* | 
| 189 | |||
| 190 | 2 | Андрей Волков | <pre> | 
| 191 | |||
| 192 | 5 | Андрей Волков | **************************************************************************** | 
| 193 | LSI Corporation SAS FLASH Utility. | ||
| 194 | |||
| 195 | SASFlash Version 1.30.00.00 (2011.08.24) | ||
| 196 | |||
| 197 | Copyright (c) 2006-2011 LSI Corporation. All rights reserved. | ||
| 198 | **************************************************************************** | ||
| 199 | |||
| 200 | Ignoring All other commands except for output flags | ||
| 201 | |||
| 202 | Attempting to flash Boot Service to LSI SAS 1064E(B3): | ||
| 203 | |||
| 204 | Validating BIOS Image. . . | ||
| 205 | |||
| 206 | BIOS Header Signature Valid. | ||
| 207 | |||
| 208 | Checksum Passed: 00000000 | ||
| 209 | |||
| 210 | BIOS Image compatible with the SAS Controller. | ||
| 211 | |||
| 212 | Attempting to Flash BIOS Image. . . | ||
| 213 | |||
| 214 | BIOS Flash: SUCCESSFUL! | ||
| 215 | |||
| 216 | Updating VPD data! | ||
| 217 | VPD update not needed | ||
| 218 | |||
| 219 | |||
| 220 | Finished Processing Commands Successfully. | ||
| 221 | Exiting SASFlash. | ||
| 222 | 1 | Андрей Волков | </pre> | 
| 223 | 6 | Андрей Волков | |
| 224 | h3. Смотрим | ||
| 225 | |||
| 226 | *./sasflash -listall* | ||
| 227 | |||
| 228 | <pre> | ||
| 229 | <code class="diff"> | ||
| 230 | **************************************************************************** | ||
| 231 | LSI Corporation SAS FLASH Utility. | ||
| 232 | |||
| 233 | SASFlash Version 1.30.00.00 (2011.08.24) | ||
| 234 | |||
| 235 | Copyright (c) 2006-2011 LSI Corporation. All rights reserved. | ||
| 236 | **************************************************************************** | ||
| 237 | |||
| 238 | Adapter Selected is a LSI SAS 1064E(B3): | ||
| 239 | |||
| 240 | Num Ctlr FW Ver NVDATA x86-BIOS EFI-BSD PCI Addr | ||
| 241 | ----------------------------------------------------------------------- | ||
| 242 | |||
| 243 | -1 1064E(B3) 01.23.46.00 2b.90 06.18.05.00 No Image 00:09:00:00 | ||
| 244 | +1 1064E(B3) 01.23.46.00 2b.90 06.18.07.00 No Image 00:09:00:00 | ||
| 245 | |||
| 246 | |||
| 247 | Finished Processing Commands Successfully. | ||
| 248 | Exiting SASFlash. | ||
| 249 | </code> | ||
| 250 | </pre> | ||
| 251 | 7 | Андрей Волков | |
| 252 | h3. Перепрошиваем BIOS второй прошивкой | ||
| 253 | |||
| 254 | *./sasflash -biosall ebcsas.rom* | ||
| 255 | |||
| 256 | <pre> | ||
| 257 | |||
| 258 | **************************************************************************** | ||
| 259 | LSI Corporation SAS FLASH Utility. | ||
| 260 | |||
| 261 | SASFlash Version 1.30.00.00 (2011.08.24) | ||
| 262 | |||
| 263 | Copyright (c) 2006-2011 LSI Corporation. All rights reserved. | ||
| 264 | **************************************************************************** | ||
| 265 | |||
| 266 | Ignoring All other commands except for output flags | ||
| 267 | |||
| 268 | Attempting to flash Boot Service to LSI SAS 1064E(B3): | ||
| 269 | |||
| 270 | Validating BIOS Image. . . | ||
| 271 | |||
| 272 | BIOS Header Signature Valid. | ||
| 273 | |||
| 274 | Checksum Passed: 00000000 | ||
| 275 | |||
| 276 | BIOS Image compatible with the SAS Controller. | ||
| 277 | |||
| 278 | Attempting to Flash BIOS Image. . . | ||
| 279 | |||
| 280 | BIOS Flash: SUCCESSFUL! | ||
| 281 | |||
| 282 | Updating VPD data! | ||
| 283 | VPD update not needed | ||
| 284 | |||
| 285 | |||
| 286 | Finished Processing Commands Successfully. | ||
| 287 | Exiting SASFlash. | ||
| 288 | </pre> |