База знаний » RAID контроллеры

h1. LSI-Logic MPT-Fusion

h1. LSI-Logic-SAS1064E-B3-SAS3042E

h2. Сбор данных

h3. Прошивка для SAS контроллера от производителя

HP ProLiant DL160 G5 Server

http://h20565.www2.hp.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=3580694

Контроллер LSI SAS 1064E(B3)

http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=MTX_80c445b9f94b4564a18dc2d165

Firmware and BIOS for HP SAS/SATA HBA with RAID

Firmware - Storage Controller

Version: 06.18.07.00 (1.23.46.00)(11 Dec 2012)

SP45154.exe (2.1 MB)

http://ftp.hp.com/pub/softlib2/software1/pubsw-windows/p1285397499/v83083/SP45154.exe

h3. Смотрим последовательность действий

cat SP45154.exe_unpacked/Release/updateEFI.nsh 

<pre>

    echo -off

    echo Please wait, this can take several minutes...

    echo PROGRAMMING FIRMWARE

    sasflash -fwall 1068\A0\HP3080X\68I_R_LD.fw  > flash.log

    sasflash -fwall 1068\B0\HP3080X\68I_R_LD.fw  >> flash.log

    sasflash -fwall 106E\B1\HP3442E\6EI_R_LD.fw  >> flash.log

    sasflash -fwall 106E\B3\HP3442E\6EI_R_LD.fw  >> flash.log

    sasflash -fwall 106E\B3\HP3042E\6EI_R_LD.fw  >> flash.log

    sasflash -fwall 106E\B3\HP3801E\6EIT__LD.fw  >> flash.log

    echo PROGRAMMING BSD / EFIBIOS

    sasflash -biosall mptsas.rom  >> flash.log

    echo PROGRAMMING BOOT SERVICES

    sasflash -biosall ebcsas.rom  >> flash.log

    echo PROGRAMMING COMPLETE!!

    echo Please see the flash.log for details.

    echo PLEASE REBOOT YOUR SYSTEM.

</pre>

h3. Прошивальщик под linux

Статья

http://bugsplatter.id.au/sasflash/#using-sasflash

Прошивальщик

http://www.lsi.com/downloads/Public/Host%20Bus%20Adapters/Host%20Bus%20Adapters%20Common%20Files/SAS_SATA_3G_P21/Installer_P21_for_Linux.zip

h3. Смотрим

*./sasflash -listall*

<pre>

 ****************************************************************************

    LSI Corporation SAS FLASH Utility.

    SASFlash Version 1.30.00.00 (2011.08.24) 

    Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

 ****************************************************************************

	Adapter Selected is a LSI SAS 1064E(B3):

 Num   Ctlr      FW Ver     NVDATA   x86-BIOS     EFI-BSD    PCI Addr

-----------------------------------------------------------------------

1   1064E(B3)  01.23.39.00  2b.86  06.18.05.00    No Image   00:09:00:00

Finished Processing Commands Successfully.

	Exiting SASFlash.

</pre>

*lsiutil -p 1 -i -s*

<pre>

LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009

1 MPT Port found

==============================================================================

/proc/mpt/ioc0    LSI Logic SAS1064E B3    MPT 105   Firmware 01172700   IOC 0

Seg/Bus/Dev/Fun    Board Name       Board Assembly   Board Tracer

 0   9   0   0     SAS3042E         L3-25006-02C     P62200BGKW540H  

Current Port State

------------------

SAS1064E's links are 1.5 G, 1.5 G, down, down

Software Version Information

----------------------------

Current active firmware version is 01172700 (1.23.39)

Firmware image's version is MPTFW-01.23.39.00-IE

  LSI Logic

x86 BIOS image's version is MPTBIOS-6.18.05.00 (2008.05.14)

Firmware Settings

-----------------

SAS WWID:                       500605b000144f2c

Multi-pathing:                  Disabled

SATA Native Command Queuing:    Disabled

SATA Write Caching:             Disabled

SATA Maximum Queue Depth:       1

Device Missing Report Delay:    3 seconds

Device Missing I/O Delay:       3 seconds

Phy Parameters for Phynum:      0    1    2    3    

  Link Enabled:                 Yes  Yes  Yes  Yes  

  Link Min Rate:                1.5  1.5  1.5  1.5  

  Link Max Rate:                3.0  3.0  3.0  3.0  

  SSP Initiator Enabled:        Yes  Yes  Yes  Yes  

  SSP Target Enabled:           No   No   No   No   

  Port Configuration:           Auto Auto Auto Auto 

Target IDs per enclosure:       1

Persistent mapping:             Enabled

Physical mapping type:          Enclosure/Slot

Target ID 0 reserved for boot:  Yes

Starting slot (direct attach):  1

Target IDs (physical mapping):  8

Interrupt Coalescing:           Enabled, timeout is 16 us, depth is 4

Persistent Mappings

-------------------

No persistent entries found

 B___T___L  Type       Vendor   Product          Rev      SASAddress     PhyNum

 0   1   0  Disk       ATA      OCZ-AGILITY3     2.25  1221000000000000     0

 0   2   0  Disk       ATA      OCZ-AGILITY3     2.25  1221000001000000     1

</pre>

h3. Перепрошиваем Firmware

*./sasflash -fwall 6ei_r_ld.fw*

<pre>

 ****************************************************************************

    LSI Corporation SAS FLASH Utility.

    SASFlash Version 1.30.00.00 (2011.08.24) 

    Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

 ****************************************************************************

	Ignoring All other commands except for output flags

	Attempting to flash firmware to LSI SAS 1064E(B3):

	Executing Operation: Flash Firmware Image

		Checksum Passed: 00000000

		Verifying NVDATA Compatibility. . .

		NVDATA Versions Compatible

		Product ID and Vendor ID match verified.

		Valid BootLoader Image verified.

		Beginning Firmware Download

		Firmware Download: SUCCESSFUL!

		Verifying the image flashed correctly. . . 

		Firmware Flash: SUCCESSFUL!

		Resetting Adapter:

		Adapter Successfully reset.

		Updating VPD data!

		VPD update not needed

Finished Processing Commands Successfully.

	Exiting SASFlash.

</pre>

h3. Смотрим

*./sasflash -listall*

<pre>

<code class="diff">

  ****************************************************************************

     LSI Corporation SAS FLASH Utility.

     SASFlash Version 1.30.00.00 (2011.08.24) 

     Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

  ****************************************************************************

 	Adapter Selected is a LSI SAS 1064E(B3):

  Num   Ctlr      FW Ver     NVDATA   x86-BIOS     EFI-BSD    PCI Addr

 -----------------------------------------------------------------------

-1   1064E(B3)  01.23.39.00  2b.86  06.18.05.00    No Image   00:09:00:00

+1   1064E(B3)  01.23.46.00  2b.90  06.18.05.00    No Image   00:09:00:00

 Finished Processing Commands Successfully.

 	Exiting SASFlash.

</code>

</pre>

h3. Перепрошиваем BIOS

*./sasflash -biosall mptsas.rom*

<pre>

 ****************************************************************************

    LSI Corporation SAS FLASH Utility.

    SASFlash Version 1.30.00.00 (2011.08.24) 

    Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

 ****************************************************************************

	Ignoring All other commands except for output flags

	Attempting to flash Boot Service to LSI SAS 1064E(B3):

		Validating BIOS Image. . .

		BIOS Header Signature Valid.

		Checksum Passed: 00000000

		BIOS Image compatible with the SAS Controller.

		Attempting to Flash BIOS Image. . .

		BIOS Flash: SUCCESSFUL!

		Updating VPD data!

		VPD update not needed

Finished Processing Commands Successfully.

	Exiting SASFlash.

</pre>

h3. Смотрим

*./sasflash -listall*

<pre>

<code class="diff">

  ****************************************************************************

     LSI Corporation SAS FLASH Utility.

     SASFlash Version 1.30.00.00 (2011.08.24) 

     Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

  ****************************************************************************

 	Adapter Selected is a LSI SAS 1064E(B3):

  Num   Ctlr      FW Ver     NVDATA   x86-BIOS     EFI-BSD    PCI Addr

 -----------------------------------------------------------------------

-1   1064E(B3)  01.23.46.00  2b.90  06.18.05.00    No Image   00:09:00:00

+1   1064E(B3)  01.23.46.00  2b.90  06.18.07.00    No Image   00:09:00:00

 Finished Processing Commands Successfully.

 	Exiting SASFlash.

</code>

</pre>

h3. Перепрошиваем EFI прошивку

*./sasflash -biosall ebcsas.rom*

<pre>

 ****************************************************************************

    LSI Corporation SAS FLASH Utility.

    SASFlash Version 1.30.00.00 (2011.08.24) 

    Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

 ****************************************************************************

	Ignoring All other commands except for output flags

	Attempting to flash Boot Service to LSI SAS 1064E(B3):

		Validating BIOS Image. . .

		BIOS Header Signature Valid.

		Checksum Passed: 00000000

		BIOS Image compatible with the SAS Controller.

		Attempting to Flash BIOS Image. . .

		BIOS Flash: SUCCESSFUL!

		Updating VPD data!

		VPD update not needed

Finished Processing Commands Successfully.

	Exiting SASFlash.

</pre>

h3. Смотрим

*./sasflash -listall*

<pre>

<code class="diff">

  ****************************************************************************

     LSI Corporation SAS FLASH Utility.

     SASFlash Version 1.30.00.00 (2011.08.24) 

     Copyright (c) 2006-2011 LSI Corporation. All rights reserved.

  ****************************************************************************

 	Adapter Selected is a LSI SAS 1064E(B3):

  Num   Ctlr      FW Ver     NVDATA   x86-BIOS     EFI-BSD    PCI Addr

 -----------------------------------------------------------------------

-1   1064E(B3)  01.23.46.00  2b.90  06.18.07.00    No Image   00:09:00:00

+1   1064E(B3)  01.23.46.00  2b.90  06.18.07.00  03.05.01.01  00:09:00:00

 Finished Processing Commands Successfully.

 	Exiting SASFlash.

</code>

</pre>